SN74HC175PWT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74HC175PWT Overview
The flip flop is packaged in a case of 16-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. The output it is configured with uses Differential. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74HC series. This D flip flop should not have a frequency greater than 60MHz. In total, there are 1 elements. This process consumes 8μA quiescents. It has been determined that there have been 16 terminations. The 74HC175 family contains this object. Power is provided by a 5V supply. There is 3pF input capacitance for this T flip flop. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. The design is based on 4bits. There is a 6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. 4 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The output current of 5.2mA makes it feature maximum design flexibility. To operate, the chip has a total of 2 output lines.
SN74HC175PWT Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
SN74HC175PWT Applications
There are a lot of Texas Instruments SN74HC175PWT Flip Flops applications.
- Computing
- Balanced 24 mA output drivers
- Guaranteed simultaneous switching noise level
- Shift Registers
- Parallel data storage
- Common Clocks
- Bounce elimination switch
- Convert a momentary switch to a toggle switch
- Data Synchronizers
- Individual Asynchronous Resets
