SN74HC191DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 48MHz |
| Base Part Number | 74HC191 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 330 ns |
| Turn On Delay Time | 330 ns |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Load/Preset Input | YES |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC191DR Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. It is configured using 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. The device has 1terminations. The total number of component pins is 16. As [0], it is packaged. A circuit is connected to other components by 16pins. The way of Surface Mount is used to mount it. In this case, it appears as a member of the HC/UH family. As a member of the 74HCseries, it is ideal for a wide range of applications. In this case, the logic type is set to [0]. -40°C~85°Cis the recommended operating temperature. It adopts a mounting type of Surface Mount. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. An array consists of 4bits for each element. Based on Pbfree code, this may result in yes. An important feature of this electronic device is [0]. Further related parts may be found under the base part number 74HC191. It is packed using [0]. The voltage source produces 2/6Vvoltage. The device requires a supply voltage of [0]. There is a minimum supply voltage (Vsup) of 2V volts. In this case, the frequency is 48MHz Hz. There is 6V maximum supply voltage (Vsup) allowed.
SN74HC191DR Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 48MHz
SN74HC191DR Applications
There are a lot of Texas Instruments SN74HC191DR Counters & Dividers applications.
- Up Counters
- Timers
- Frequency dividers
- SQUARING
- LINEARIZATION
- Control counters
- POWER COMPUTATION
- ALGEBRAIC COMPUTATION
- Clocks
- Signal gating
