SN74HC193DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SEPARATE UP/DOWN CLOCK |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC193 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 325 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Timing | Synchronous |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC193DT Overview
This is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. There are 16terminations used for configuring it. The supply voltage of 5V enables it operate in a fully flexible way. The device has 1terminations. There are 16pins on all components. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. It is mounted in the manner of [0]. In this case, it appears as a member of the HC/UH family. The 74HCseries offers a wide range of applications due to its versatility. Binary Counteris adopted as the logic type. Setting the operating temperature to -40°C~85°C is recommended. Mounting type Surface Mountis used. Providing a voltage of 2V~6Vensures higher reliability of operation. There are 4bits stored in each element of the array. When it comes to this electronic device, SEPARATE UP/DOWN CLOCK are much important features. It should be noted that there are more related parts under the 74HC193base part number. For its packaging, TAPE AND REELis employed. The voltage source produces 2/6Vvoltage. In order to operate, it requires a voltage of [0]. There is 2V minimum supply voltage (Vsup) for this device. With a frequency of [0], it operates. There is 6V maximum supply voltage (Vsup) allowed.
SN74HC193DT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
SEPARATE UP/DOWN CLOCK
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC193DT Applications
There are a lot of Texas Instruments SN74HC193DT Counters & Dividers applications.
- SQUARING
- Programmable decade counters
- TRUE RMS-TO-DC CONVERSION
- Time delay circuits
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Timers
- Frequency dividers
- Binary counter/decoder
- POWER COMPUTATION
- counting/frequency sy nthesizers-BCD output
