SN74HC193PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SEPARATE UP/DOWN CLOCK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Base Part Number | 74HC193 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 325 ns |
| Turn On Delay Time | 325 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 55 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC193PW Overview
This device is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. For its configuration, 16terminations are used. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device contains 1terminations. All component pins are equal to 16. As a result, it is packaged as Tube. A circuit is connected to other components by 16pins. It is mounted in the manner of [0]. It is a member of the family [0]. Due to its membership in the 74HCseries, it is suitable for a variety of applications. A logic type of Binary Counter is adopted. It is recommended to set the operating temperature to -40°C~85°C. Mounting type Surface Mountis used. In the case of a supply voltage of [0], it operates more reliably. The array consists of elements storing 4bits each. Pbfree code may produce the result yes. This electronic device is equipped with the following features [0]. Further related parts can be found under its base part number 74HC193. From the voltage source, there is a voltage of 2/6V volts. To operate, the device requires a voltage of [0]. Supply voltage (Vsup) can be as low as 2V. It operates with the frequency of 60MHz. Up to 6Vis the maximum supply voltage (Vsup).
SN74HC193PW Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
SEPARATE UP/DOWN CLOCK
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC193PW Applications
There are a lot of Texas Instruments SN74HC193PW Counters & Dividers applications.
- Clocks
- VHF, UHF, FM, AM, etc.
- Up Counters
- Timing applications
- TRUE RMS-TO-DC CONVERSION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time delay circuits
- LINEARIZATION
- Communications Digital Frequency Synthesizers;
- Timers
