SN74HC193PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SEPARATE UP/DOWN CLOCK |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 325 ns |
| Turn On Delay Time | 325 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Bidirectional |
| Sync/Async | Synchronous |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC193PWG4 Overview
This is a device supplied in the TSSOP package. The configuration of this device is based on 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. There are 1 terminations on the device. The number of all component pins is 16. Circuit components are connected by 16pins. It is mounted in the manner of [0]. The HC/UHfamily is derived from it. The device contains information consisting of 4bits. This electronic device is equipped with the following features [0]. It is manufactured in the temperature grade INDUSTRIAL. It is packed with [0]. It takes supply voltage of 5V to operate. Electrical characteristics are stable at temperature 85°Cfor extended periods of time. Generally, the temperature range of the device is set at -40°C. It operates with the frequency of 60MHz. It reaches 6Vvoltage at its maximum. In the case of this device, the minimum voltage is as low as 2V volts.
SN74HC193PWG4 Features
Embedded in the TSSOP package
SEPARATE UP/DOWN CLOCK
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC193PWG4 Applications
There are a lot of Texas Instruments SN74HC193PWG4 Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- Divide-by"N" counters/frequency synthesizers
- SQUARING
- counting/frequency sy nthesizers-BCD output
- Time-delay circuits
- Analog multiplexing and demultiplexing
- ALGEBRAIC COMPUTATION
- Fixed and programmable counters greater than 10
- Clocks
- SQUARE ROOT
