SN74HC193QPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC193 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 390 ns |
| Turn On Delay Time | 390 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 55 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC193QPWRG4Q1 Overview
In the 16-TSSOP (0.173, 4.40mm Width)package, it is supplied. The configuration of this device is based on 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. In this diagram, there are 1elements that are interconnected by wires. All component pins are equal to 16. Packaging is based on Tape & Reel (TR). In the circuit, 16pins are used to connect other components. To mount it, use the method of [0]. The HC/UHfamily is derived from it. Having been designed as a member of the Automotive, AEC-Q100, 74HCseries, it is well suited for use in a wide range of applications. Binary Counteris adopted as the logic type. Setting the operating temperature to -40°C~85°C is recommended. It adopts a mounting type of Surface Mount. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. It contains 4elements. It is possible for the result to be yesin Pbfree code. It should be noted that there are more related parts under the 74HC193base part number. The packing of this product is performed by [0]. In this case, there is 2/6V voltage coming from the voltage source. The device operates on a supply voltage of [0]. As low as 2V Vsup is the minimum supply voltage. The maximum supply voltage (Vsup) is up to 6V.
SN74HC193QPWRG4Q1 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
SN74HC193QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74HC193QPWRG4Q1 Counters & Dividers applications.
- POWER COMPUTATION
- Decade counter/decimal decode display (CD4017B）
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Divide-by"N" counters/frequency synthesizers
- Time delay circuits
- Clocks
- LINEARIZATION
- Counter control/timers
- Binary counter/decoder
- Dual Up Counters
