SN74HC241DW
| Parameters | |
|---|---|
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC241 |
| Pin Count | 20 |
| Output Type | 3-State |
| Max Output Current | 7.8mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 150pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Propagation Delay | 250 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 4 |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
SN74HC241DW Overview
Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74HC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the HC/UH family, the electric component belongs. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74HC241" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceiver. The digital buffer starts up under ENABLE LOW/HIGH control technology. In quiescent state, the electronic part uses 8μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals. The typical output current of the logical driver is measured 7.8mA.
SN74HC241DW Features
Bus Driver/Transceiver
SN74HC241DW Applications
There are a lot of Texas Instruments SN74HC241DW Buffers & Transceivers applications.
- Bar, KTV wireless entertainment
- Telecom and datacom networking applications
- interconnection between switches
- IP cameras
- Point-to-point networking
- Data center
- Ethernet circuitry
- Low power, low voltage systems
- Clock radio
- Shortwave receiver
