banner_page

SN74HC241PWG4

SN74HC241PWG4 datasheet pdf and Logic - Buffers, Drivers, Receivers, Transceivers product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC241PWG4
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 940
  • Description: SN74HC241PWG4 datasheet pdf and Logic - Buffers, Drivers, Receivers, Transceivers product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tube
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74HC241
Pin Count 20
Output Type 3-State
Operating Supply Voltage 5V
Number of Elements 2
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Propagation Delay 165 ns
Quiescent Current 8μA
Turn On Delay Time 250 ns
Family HC/UH
Logic Function Buffer, Inverting
Current - Output High, Low 7.8mA 7.8mA
Logic Type Buffer, Non-Inverting
Max I(ol) 0.006 A
Number of Bits per Element 4
Control Type ENABLE LOW/HIGH
Number of Input Lines 8
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

SN74HC241PWG4 Overview


Logical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74HC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a HC/UH family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74HC241" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW/HIGH control technology. In quiescent state, the electronic part uses 8μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals.

SN74HC241PWG4 Features


Bus Driver/Transceivers

SN74HC241PWG4 Applications


There are a lot of Texas Instruments SN74HC241PWG4 Buffers & Transceivers applications.

  • Switches/bridges/routers/servers
  • Remote controls
  • Point-to-point networking
  • WDM transmission
  • Wireless HD Photography
  • Vehicle, ship, aircraft navigation and positioning
  • Satellite radio receiver
  • TV signal transmission
  • Changeing the frequency from IF to RF
  • Wireless showroom

Write a review

Note: HTML is not translated!
    Bad           Good