banner_page

SN74HC251D

16 Terminations2V~6V 16 Pin 74HC251 Signal switch74HC Series 1 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC251D
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 659
  • Description: 16 Terminations2V~6V 16 Pin 74HC251 Signal switch74HC Series 1 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HC251
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 1 x 8:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 1
Number of Bits 8
Propagation Delay 52 ns
Family HC/UH
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Voltage Supply Source Single Supply
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC251D Overview


As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tube.Mounting is performed using Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 2V~6V, designers have superior flexibility.Multiplexers of the 74HC series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.As its base part number is 74HC251, logic switch can also be used to find its related parts.The multiplexer's system is powered by 5V volts.A component pin count of 16 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.A total of 16 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.There are 8 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.For mux switch's normal operation, power supply 2/6V is provided.The turn signal switch has 1 outputs.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.There are 8 inputs provided in this multiplexer.During normal operation, the digitalswitch consists of 1 circuits.

SN74HC251D Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V

SN74HC251D Applications


There are a lot of Texas Instruments SN74HC251D Signal Switches / Multiplexers / Decoders applications.

  • RF-based home automation system
  • Automatic health monitoring systems
  • LVDS
  • Encrypted communications system
  • Relay
  • Communication system
  • Microprocessor memory systems
  • Robotic vehicles
  • Analog to digital conversion
  • HDMI applications

Write a review

Note: HTML is not translated!
    Bad           Good