banner_page

SN74HC251N

16 Terminations2V~6V 16 Pin 74HC251 Signal switch74HC Series 1 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC251N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 399
  • Description: 16 Terminations2V~6V 16 Pin 74HC251 Signal switch74HC Series 1 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Max Power Dissipation 1.25W
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74HC251
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 1 x 8:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 1
Number of Bits 8
Propagation Delay 51 ns
Family HC/UH
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Voltage Supply Source Single Supply
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC251N Overview


In order to save board space, digital switch is located in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in a way that is referred to as Tube.Digital switch ic adheres to a mounting method of Through Hole.In the multiplexers, the analog IC is indicated by Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2V~6V, designers have superior flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74HC251, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 component pins.As a type of supply, Single is employed.Currently, it is configured with a 16 pin configuration.It is positioned in the direction of Through Hole.In the HC/UH family, the logic switch is included.Signal multiplexer provides 8 bits.Keeping Vsup at 2V will prevent some unwanted failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.It is provided that 2/6V has a power supply in order to function normally.As a result, the turn signal switch consists of 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer provides 8 inputs.It is necessary for the digitalswitch to operate normally that 1 circuits be formed.

SN74HC251N Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V

SN74HC251N Applications


There are a lot of Texas Instruments SN74HC251N Signal Switches / Multiplexers / Decoders applications.

  • Signal router
  • Computer memory
  • Textile mills
  • To select different devices in microprocessor output
  • Enabling different functions units in microprocessor instruction decoding
  • Enabling different rows of memory depending on address in memory chips
  • High-performance memory systems
  • Idle motor
  • Enabling block of memory depending on address in memory chips
  • Electronically controlled engine system

Write a review

Note: HTML is not translated!
    Bad           Good