SN74HC251PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC251 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 52 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC251PWR Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.Multiplexer is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74HC251 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.A component pin count of 16 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.Currently, it is configured with 16 pins.The mounting is in the way of Surface Mount.There is a family of HC/UH members.The multiplexer ic provides 8 bits.Keep Vsup at 2V to avoid unnecessary failures.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.mux switch's normal operation requires the power supply of 2/6V.There are 1 outputs designed for the operation of the turn signal switch.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.It has 8 inputs.The switches packaging is based on TR.
SN74HC251PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V
SN74HC251PWR Applications
There are a lot of Texas Instruments SN74HC251PWR Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Data-routing applications
- Paper plants
- High-performance memory-decoding applications
- HDMI applications
- Computer memory
- Control unit of Central Processing unit (CPU)
- Data distribution
- Memory system of computers
- A/D converters
