SN74HC253D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Output Current | 7.8mA |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Family | HC |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC253D Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.The package is in the form of Tube.digital switch ic uses the method of Surface Mount for mounting.Multiplexer is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.The multiplexers from 74HC series can be used for a wide range of applications.Among its basic configurations are 16 terminations.The base part number is 74HC253, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.Signal switch has 16 component pins.A conductor terminates at GULL WING.This supply type employs Single.There are 16 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the HC family.Signal multiplexer consists of 4 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).Keeping Vsup at 6V will prevent some unnecessary failures.The turn signal switch has 1 outputs.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.It is provided with 8 inputs.This turn signal switch's circuit is based on a circuit with 2 channels.Higher switches' flexibility is provided by providing 7.8mA as the output current.
SN74HC253D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC253D Applications
There are a lot of Texas Instruments SN74HC253D Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Code conversion
- Metal detectors
- Night vision cameras
- Seven segment displays
- Communication system
- Telephone network
- Electronically controlled engine system
- Injectors
- Microprocessor input/output systems
