SN74HC253DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 425mW |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Family | HC |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC253DBR Overview
Providing this information in the 16-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.Cut Tape (CT) is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.With the 74HC series, the multiplexers are suitable for a diverse range of applications.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 74HC253 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.There are 16 component pins in this turn signal switch.As a result, conductors end at GULL WING.This supply type employs Single.This multiplexer ic is configured with 16 pins.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of HC.In this signal multiplexer, there are 4 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.There are 1 outputs designed for the operation of the turn signal switch.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.This multiplexer is equipped with 8 inputs and 8 outputs.The switches is packaged according to the way of TR.The turn signal switch's circuit consists of 2 transmission channels.
SN74HC253DBR Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC253DBR Applications
There are a lot of Texas Instruments SN74HC253DBR Signal Switches / Multiplexers / Decoders applications.
- Relay
- Electronics industry
- Make half adder
- A robotic vehicle with the metal detector
- Medium scale TV wall
- Signal router
- Enabling different functions units in microprocessor instruction decoding
- Image transmission
- Data demultiplexing
- Speed control of medern motors
