SN74HC253DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Family | HC |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC253DR Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.Among its basic features are 16 terminations.In addition, it also has a base part number of 74HC253, which can be used to find related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.The mounting point is Surface Mount.The logic switch is included into the family of HC.Signal multiplexer contains 4 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.The turn signal switch has 1 outputs designed for operation.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The multiplexer is equipped with 8 inputs.The switches is packaged according to the way of TR.The turn signal switch's circuit consists of 2 transmission channels.
SN74HC253DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC253DR Applications
There are a lot of Texas Instruments SN74HC253DR Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Decimal decoder
- Recording transmission
- LVDS
- PCIe
- Seven segment displays
- Electronic circuits
- Automation system
- War field flying robot with a night vision flying camera
- Control unit of Central Processing unit (CPU)
