SN74HC253N
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Family | HC |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
SN74HC253N Overview
Providing this information in the 16-DIP (0.300, 7.62mm) enables digital switch board space to be saved.As a result, it is packaged in the way of Tube.Digital switch ic uses a Through Hole mounting method.the multiplexers uses an analog IC Multiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74HC series.As part of its basic configuration, 16 terminations are designed as a part of it.You can also find related parts by using its logic switch base part number of 74HC253.The multiplexer is supplied with 5V voltage.A component pin count of 16 is found on this turn signal switch.In this case, Single is employed as the supply type.A configuration of 16 pins is used.The multiplexer ic is mounted in the direction of Through Hole.There is a family of HC members.As a result, signal multiplexer provides a total of 4 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.This turn signal switch has 1 outputs designed for its operation.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 8 inputs and 8 outputs.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.
SN74HC253N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC253N Applications
There are a lot of Texas Instruments SN74HC253N Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- War field flying robot with a night vision flying camera
- Data collection system
- Memory system of computers
- Code converters
- Used to connect a single source to multiple destinations
- Steel plants
- Data distribution
- Electronically controlled engine system
- Transmission from the computer system of a satellite
