banner_page

SN74HC257PWR

16 Terminations2V~6V 16 Pin 74HC257 Signal switch74HC Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC257PWR
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 801
  • Description: 16 Terminations2V~6V 16 Pin 74HC257 Signal switch74HC Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number 74HC257
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 4 x 2:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Channels 4
Load Capacitance 50pF
Number of Bits 2
Throw Configuration DPST
Propagation Delay 26 ns
Family HC/UH
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Voltage Supply Source Single Supply
Independent Circuits 1

SN74HC257PWR Overview


In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The part number for 74HC257 can be used to find its logic switch related parts as well.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of HC/UH.The multiplexer ic provides 2 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).Avoid unnecessary failures by keeping Vsup at 6V.For the turn signal switch's operation, there are 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.In this multiplexer, there is a total of 8 inputs.TR is used to package the switches.Transmission is carried out over 4 channels in the turn signal switch's circuit.

SN74HC257PWR Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

SN74HC257PWR Applications


There are a lot of Texas Instruments SN74HC257PWR Signal Switches / Multiplexers / Decoders applications.

  • High-performance memory-decoding applications
  • Automatic Monitoring systems
  • Data demultiplexing
  • A/D converters
  • To select different task for memory in microprocessor memory systems
  • Arithmetic Logic Units
  • Make half adder
  • Idle motor
  • CPU memory location identification
  • To select different devices in microprocessor input

Write a review

Note: HTML is not translated!
    Bad           Good