banner_page

SN74HC257PWT

16 Terminations2V~6V 16 Pin 74HC257 Signal switch74HC Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC257PWT
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 613
  • Description: 16 Terminations2V~6V 16 Pin 74HC257 Signal switch74HC Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74HC
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Termination SMD/SMT
ECCN Code EAR99
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74HC257
Pin Count 16
Number of Outputs 1
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Channels 4
Load Capacitance 50pF
Number of Bits 2
Propagation Delay 26 ns
Family HC/UH
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Output Polarity TRUE
Max I(ol) 0.006 A
Voltage Supply Source Single Supply
Independent Circuits 1
Length 5mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC257PWT Overview


This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74HC series, which provide extensive application potential.As parts of its basic configuration, 16 terminations are desgined.The base part number is 74HC257, which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 16 pin configuration.The mounting point is Surface Mount.The logic switch belongs to the family of HC/UH.Signal multiplexer contains 2 bits.Keep Vsup at 2V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.The turn signal switch has 1 outputs.The switches package is packaged in accordance with TAPE AND REEL.In the turn signal switch's circuit, there are 4 channels used for transmission.

SN74HC257PWT Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74HC257PWT Applications


There are a lot of Texas Instruments SN74HC257PWT Signal Switches / Multiplexers / Decoders applications.

  • Automatic Monitoring systems
  • Transmission from the computer system of a satellite
  • Encrypted communications system
  • Frequency multiplexing system
  • Time division multiplexing system
  • Enabling block of memory depending on address in memory chips
  • Image transmission
  • Small scale TV wall
  • Solenoid cooling fan
  • Computer memory

Write a review

Note: HTML is not translated!
    Bad           Good