SN74HC258DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Number of Bits | 2 |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC258DR Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74HC series multiplexers.There are 16 terminations included in its basic configuration.There is a base part number 74HC258 that can be used to locate signal switch's related components as well.The multiplexer's system works with 5V voltage.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.With 16 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of HC/UH.There are 2 bits signal multiplexer provides.Vsup should be kept at 2V to prevent some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 6V.As part of the operation of this turn signal switch, there are 1 outputs.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This multiplexer has 8 inputs.The switches package is packaged in accordance with TR.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
SN74HC258DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC258DR Applications
There are a lot of Texas Instruments SN74HC258DR Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Data collection system
- PCIe
- Signal router
- Combinational circuit
- Implementing boolean functions with multiple variables
- High-performance memory-decoding applications
- Analog, digital or video signal switching
- Automation system
- Used to connect a single source to multiple destinations
