SN74HC258N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC258N Overview
Digital switch is provided in the 16-DIP (0.300, 7.62mm) for the purpose of saving board space.Tube is the packaging method.For mounting, digital switch ic uses the method Through Hole.In the multiplexers, the analog IC is indicated by Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Since they are members of the 74HC series, they can be used in a wide variety of applications.The basic configuration of this system includes 16 terminations.The base part number is 74HC258, so you can find its logic switch related parts using that number.The multiplexer is supplied with 5V voltage.This turn signal switch contains 16 component pins.Single is used as its supply type.The board has 16 pins configured.Through Hole is the way it is mounted.The logic switch is a member of the family of HC/UH.In this signal multiplexer, there are 2 bits that are provided.Vsup should be kept at 2V to prevent some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 6V.The turn signal switch contains 1 outputs designed to operate.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This multiplexer has 8 inputs.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN74HC258N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC258N Applications
There are a lot of Texas Instruments SN74HC258N Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Transmission from the computer system of a satellite
- Make half adder
- RF-based home automation system
- Logic gates for other digital devices
- Control unit of Central Processing unit (CPU)
- Injectors
- Steel plants
- Idle motor
- Recording transmission
