banner_page

SN74HC258NSR

16 Terminations2V~6V 16 Pin 74HC258 Signal switch74HC Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC258NSR
  • Package: 16-SOIC (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 278
  • Description: 16 Terminations2V~6V 16 Pin 74HC258 Signal switch74HC Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.209, 5.30mm Width)
Number of Pins 16
Weight 200.686274mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number 74HC258
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Channels 4
Load Capacitance 50pF
Number of Bits 2
Propagation Delay 26 ns
Family HC/UH
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Output Polarity INVERTED
Voltage Supply Source Single Supply
Independent Circuits 1
Height 2mm
Length 10.3mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC258NSR Overview


This is a relatively small item of digital switch that is included in the 16-SOIC (0.209, 5.30mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Multiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.The basic configuration of this system includes 16 terminations.The base part number is 74HC258, which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of HC/UH the logic switch is a member.The multiplexer ic provides 2 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.As part of the operation of this turn signal switch, there are 1 outputs.The performance of the multiplexers can be reliably maintained at a voltage of 5V.It is provided with 8 inputs.According to TR, the switches is packaged.A total of 4 transmission channels are available in the turn signal switch's circuit.

SN74HC258NSR Features


Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

SN74HC258NSR Applications


There are a lot of Texas Instruments SN74HC258NSR Signal Switches / Multiplexers / Decoders applications.

  • D/A converters
  • GLAN
  • To select different task for memory in microprocessor memory systems
  • Seven segment displays
  • Control unit of Central Processing unit (CPU)
  • Make full adder
  • PCIe
  • CPU memory location identification
  • Data bus control
  • Microprocessor input/output systems

Write a review

Note: HTML is not translated!
    Bad           Good