SN74HC258PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC258PW Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Several applications are possible for 74HC series multiplexers.Its basic configuration includes terminations in the 16 range.In addition, it also has a base part number of 74HC258, which can be used to find related parts.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.In this case, the supply type is Single.Currently, it is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of HC/UH.Signal multiplexer contains 2 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.There are 1 outputs designed to operate the turn signal switch.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.A multiplexer such as this has 8 inputs available.For transmission, there are 4 channels in the turn signal switch's circuit.
SN74HC258PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC258PW Applications
There are a lot of Texas Instruments SN74HC258PW Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Enabling different rows of memory depending on address in memory chips
- Solenoid cooling fan
- Speed control of medern motors
- Relay
- Steel plants
- Robotic vehicles
- CNC machines
- Night vision cameras
- Microprocessor memory systems
