SN74HC258PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC258PWR Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Multiplexer is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.Among its basic features are 16 terminations.There is a base part number 74HC258 that can be used to locate signal switch's related components as well.For multiplexer's system, 5V voltage is supplied.This turn signal switch consists of 16 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.There are 2 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).Avoid unnecessary failures by keeping Vsup at 6V.The turn signal switch has 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.A multiplexer such as this has 8 inputs available.The switches package is packaged in accordance with the TR method.Transmission is carried out over 4 channels in the turn signal switch's circuit.
SN74HC258PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC258PWR Applications
There are a lot of Texas Instruments SN74HC258PWR Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- Make full adder
- A robotic vehicle with the metal detector
- Analog, digital or video signal switching
- Injectors
- Computer memory
- War field flying robot with a night vision flying camera
- Enabling different functions units in microprocessor instruction decoding
- Small scale TV wall
- Combinational circuit
