SN74HC258PWT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74HC258PWT Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.The multiplexers from 74HC series can be used for a wide range of applications.There are 16 terminations included in its basic configuration.Its logic switch base part number is 74HC258 which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 16 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.The board has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the family of HC/UH.As a result, signal multiplexer provides a total of 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.Keeping Vsup at 6V will prevent some unnecessary failures.For the turn signal switch's operation, there are 1 outputs.The switches package is packaged in a way which is consistent with TAPE AND REEL.Voltage levels are accepted through 2 input lines of multiplexers.
SN74HC258PWT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
2 input lines
SN74HC258PWT Applications
There are a lot of Texas Instruments SN74HC258PWT Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Arithmetic Logic Units
- RF-based home automation system
- Relay
- Make half adder
- Electronic circuits
- Microprocessor instruction decoding
- Logic circuits
- Speed synchronization of multiple motors in industries
- Code converters
