SN74HC259D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC259 |
| Pin Count | 16 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Propagation Delay | 28 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Shift Register |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.0052 A |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC259D Overview
Package 16-SOIC (0.154, 3.90mm Width) includes it. Tube is the packaging method. In this configuration, the output is set to Standard. This electrical device has the logic type D-Type, Addressable. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 2V~6V. A temperature of -40°C~85°C is used for operation. In the 74HC series, this FPGA is located. 8 Bits are used in the design of this electronic part. This device has been designed with 16 terminations available. The family it belongs to is 74HC259. A 5V voltage supply is required for operation. There are 16 pins on it. It is a member of the HC/UH family of electronic devices. 16 pins are used in its design. Mounting this electronic component follows the Surface Mount method. There is a subcategory of FF/Latches for this part. When Vsup reaches 6V, the maximal supply voltage is reached. The system is powered by 2/6V sources. A voltage greater than 2V must be supplied as a power supply (Vsup). The output current of 5.2mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. It consumes 8μA of quiescent current without being affected by external factors. A total of 1 elements make up this object.
SN74HC259D Features
16-SOIC (0.154, 3.90mm Width) package
74HC series
8 Bits
74HC259 family
16 pin count
16 pins
2/6V power supplies
1 elements
SN74HC259D Applications
There are a lot of Texas Instruments SN74HC259D Latches applications.
- Programmable binary
- Serial Output Data Queuing
- Network Switches
- Automatic test equipment
- Registers
- Hammer
- Four-bit storage with output enable
- Counting
- Counters
- Automotive HEV/EV Powertrain
