SN74HC259PWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Propagation Delay | 22 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Shift Register |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.0052 A |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC259PWT Overview
In the package 16-TSSOP (0.173, 4.40mm Width), it can be found. This package has the format of Tape & Reel (TR). In its configuration, Standard is used as the output. There is a logic type of D-Type, Addressable associated with this electrical device. Surface Mount is used to mount this electronic part. It operates at a voltage of 2V~6V. It is -40°C~85°C at the operating temperature. The 74HC series is associated with this FPGA. An electronic part with 8 bits is designed. This device has been designed with 16 terminations available. This type belongs to the 74HC259 family. The device works with a voltage of 5V for its supply voltage. 16 pins are provided. This electronic device belongs to the family of HC/UH. The pin configuration of the device is 16. Mounting this electronic component follows the Surface Mount method. Subcategory FF/Latches includes this part. It reaches 6V when the supply voltage (Vsup) reaches maximum. A total of 2/6V power supplies are required for it to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. Considering the reliability of this device, it would be a good candidate for TR. Its 5.2mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consists of 1 elements.
SN74HC259PWT Features
16-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC259 family
16 pin count
16 pins
2/6V power supplies
1 elements
SN74HC259PWT Applications
There are a lot of Texas Instruments SN74HC259PWT Latches applications.
- Serial Output Data Queuing
- Counter timers
- Pseudo-random code generators
- Network Switches
- Bus system register with enable parallel lines at bus side
- Serial Output Register
- Avionics
- TV Set-top Boxes
- Storage
- Lamp and Display (LED)
