SN74HC273PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 36MHz |
| Propagation Delay | 160 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 46ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC273PW Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. As part of the package Tube, it is embedded. As configured, the output uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. -40°C~85°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74HCseries of FPGAs. A frequency of 36MHzshould be the maximum output frequency. In total, it contains 1 elements. Terminations are 20. The object belongs to the 74HC273 family. The power source is powered by 5V. The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. An electronic part designed with 8bits is used in this application. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 5.2mA . Currently, there are 2 input lines present. There is 8μA quiescent current consumption by it. Additionally, it is characterized by DUMMY VAL. There are 8 channels available.
SN74HC273PW Features
Tube package
74HC series
20 pins
8 Bits
SN74HC273PW Applications
There are a lot of Texas Instruments SN74HC273PW Flip Flops applications.
- EMI reduction circuitry
- Shift registers
- Latch
- Individual Asynchronous Resets
- Common Clocks
- Dynamic threshold performance
- Latch-up performance
- Bus hold
- Frequency division
- Counters
