SN74HC273QDWRG4Q1
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
SN74HC273QDWRG4Q1 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the Automotive, AEC-Q100, 74HC series. Its output frequency should not exceed 60MHz. In total, there are 1 elements. There is a consumption of 8μAof quiescent energy. The number of terminations is 20. D latch belongs to the 74HC273 family. A voltage of 5V is used to power it. This T flip flop has a capacitance of 3pF farads at the input. In this case, the D flip flop belongs to the HC/UHfamily. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. It reaches the maximum supply voltage (Vsup) at 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 2/6V. In order to achieve high efficiency, the supply voltage should be maintained at 5V. As of now, there are 8input lines.
SN74HC273QDWRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
20 pins
8 Bits
2/6V power supplies
SN74HC273QDWRG4Q1 Applications
There are a lot of Texas Instruments SN74HC273QDWRG4Q1 Flip Flops applications.
- Frequency Dividers
- ESCC
- Frequency division
- ESD performance
- Set-reset capability
- Common Clocks
- Consumer
- Latch
- Shift Registers
- Reduced system switching noise
