SN74HC367DT
| Parameters | |
|---|---|
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC367 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 120 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 285 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 2, 4 (Hex) |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 6 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
SN74HC367DT Overview
Logical driver uses a neat 16-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74HC series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the HC/UH family of parts. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74HC367" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74HC367DT Features
Bus Driver/Transceivers
ONE FUNCTION WITH TWO BITS
SN74HC367DT Applications
There are a lot of Texas Instruments SN74HC367DT Buffers & Transceivers applications.
- Home theater wiring-free
- Telecom and datacom networking applications
- Wireless projection application for conferences and business talks
- Single to Multimode Fiber Conversion
- Switches/bridges/routers/servers
- WDM transmission
- Wireless teaching
- Changeing the frequency from IF to RF
- Laser diode bonding
- Sensor reporting
