banner_page

SN74HC373AN

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC373 DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC373AN
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 929
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC373 DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount, Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number 74HC373
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 2/6V
Load Capacitance 50pF
Number of Bits 8
Propagation Delay 220 ns
Turn On Delay Time 15 ns
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Independent Circuits 1
Delay Time - Propagation 12ns
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC373AN Overview


In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the way it is packaged. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. In order for it to operate, it needs a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. A device such as this has 20 terminations designed. It belongs to 74HC373 family. There are 20 pins on it. Mounting this electronic component follows the Surface Mount, Through Hole method. There is a subcategory of FF/Latches for this part. There are 2/6V power supplies attached to it. In order to achieve high efficiency, the supply voltage should be kept at 5V.

SN74HC373AN Features


20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC373 family
20 pins
2/6V power supplies

SN74HC373AN Applications


There are a lot of Texas Instruments SN74HC373AN Latches applications.

  • Frequency dividing
  • Multistage ripple counting
  • Address register
  • Ring counter
  • Phase comparator
  • Hammer Device Information
  • TV Set-top Boxes
  • General-Purpose Register
  • Serial Output Register
  • Registers

Write a review

Note: HTML is not translated!
    Bad           Good