SN74HC373DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC373DWE4 Overview
A package called SOIC contains it. Rail/Tube is the packaging method. With this electronic part, there are 8 bits. This device has 20 terminations. The supply voltage of the device is 5V. 20 pins are included. There is a device in this electronic family called HC/UH. With the design of the board, there are only 20 pins. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. High efficiency requires a voltage supply of 5V. Its superior flexibility is achieved by using 8 circuits. 7.8mA is set as the low level output current. In the high level output current, the value is set to -7.8mA. It is recommended to work at a temperature lower than 85°C. It is recommended that the operating temperature be higher than -40°C. It is capable of providing a maximum supply voltage of 6V. The minimal voltage for operation is 2V. As for the logic IC it uses, it is a BUS DRIVER. The output current of 7.8mA makes it feature maximum design flexibility.
SN74HC373DWE4 Features
SOIC package
8 Bits
20 pin count
20 pins
SN74HC373DWE4 Applications
There are a lot of Texas Instruments SN74HC373DWE4 Latches applications.
- Counting
- TV Set-top Boxes
- Hammer Device Information
- Up/down difference counting
- Data acquisition
- Shift right with parallel loading
- Parallel Input
- Registers
- Hammer
- Clocks
