banner_page

SN74HC373DWG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC373DWG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 265
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TUBE
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 7.8mA
Number of Bits 8
Propagation Delay 285 ns
Turn On Delay Time 15 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.006 A
High Level Output Current -7.8mA
Low Level Output Current 7.8mA
Independent Circuits 1
Height 2.35mm
Length 12.8mm
Width 7.52mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HC373DWG4 Overview


The SOIC package contains it. It is designed with 8 bits. This device has been designed with 20 terminations available. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of HC/UH. It is designed with 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there are 2 ports. The part belongs to the FF/Latches subcategory. Its reliable performance makes it an excellent choice for TUBE. High efficiency requires maintaining the supply voltage at 5V. To achieve its exceptional flexibility, it relies on 8 circuits. 7.8mA is set as the low level output current. It is set to zero for the high level output current. Lower than 85°C is the ideal operating temperature. The operating temperature should be higher than -40°C. There is a maximum voltage supply of 6V that can be applied to it. With a voltage of 2V, it operates at its minimum capacity. BUS DRIVER is the logic IC it uses. As the output current is 7.8mA, the design flexibility is maximum.

SN74HC373DWG4 Features


SOIC package
8 Bits
20 pin count
20 pins

SN74HC373DWG4 Applications


There are a lot of Texas Instruments SN74HC373DWG4 Latches applications.

  • Automotive Cluster
  • Up-Down Johnson
  • Bus system register with enable parallel lines at bus side
  • Up/down difference counting
  • Address register
  • Display driver
  • Automotive Infotainment
  • Registers
  • Digital bus buffer
  • Counters

Write a review

Note: HTML is not translated!
    Bad           Good