SN74HC373DWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC373DWRE4 Overview
It is embedded in the SOIC package. Packaged in the way of Tape and Reel. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. The device is operated when the supply voltage is set to 5V. There are 20 pins attached to it. In terms of electronic devices, this one is in the HC/UH family. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. In the subcategory FF/Latches, this part belongs. Based on its reliable performance, this device is suitable for TR. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Aquiescent current is consumed by 8μA without being affected by external forces. 7.8mA is the low level output current. -7.8mA is set as the high level output current. Operating temperatures should be below 85°C. Temperatures higher than -40°C should be used for operation. There is a maximum voltage of 6V supported. With a voltage of 2V, it operates at its minimum capacity. A BUS DRIVER logic IC is used. With an output current of 7.8mA, it is highly flexible in terms of design.
SN74HC373DWRE4 Features
SOIC package
8 Bits
20 pin count
20 pins
SN74HC373DWRE4 Applications
There are a lot of Texas Instruments SN74HC373DWRE4 Latches applications.
- Display
- PCs and Notebooks
- Parallel data storage
- Double bus register system
- Pattern generators
- Multi-line decoders
- Counters
- Up-Down Johnson
- Communication systems
- Registers
