Parameters |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.006 A |
High Level Output Current |
-7.8mA |
Low Level Output Current |
32mA |
Independent Circuits |
1 |
Height |
2.35mm |
Length |
12.8mm |
Width |
7.52mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
20 |
Weight |
500.709277mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Temperature Grade |
INDUSTRIAL |
Number of Circuits |
8 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
34 ns |
Turn On Delay Time |
15 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
SN74HC373DWRG4 Overview
It is embedded in the SOIC package. It is packaged in the way of Tape and Reel. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. With a supply voltage of 5V, it operates. It is equipped with 20 pin count. It is a member of the HC/UH family of electronic devices. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. Optimal efficiency requires 5V as the supply voltage. 8 circuits are used to provide this superior level of flexibility. In the low level output current, the value is set to 32mA. There is -7.8mA high level output current set. The operating temperature should be lower than 85°C. Temperatures above -40°C should be used. There is a maximum voltage of 6V supported. There is a minimum supply voltage of 2V for it. As for the logic IC it uses, it is a BUS DRIVER. Due to its 7.8mA output current, it offers maximum design flexibility.
SN74HC373DWRG4 Features
SOIC package
8 Bits
20 pin count
20 pins
SN74HC373DWRG4 Applications
There are a lot of Texas Instruments SN74HC373DWRG4 Latches applications.
- Multi-line decoders
- Ring counter
- Shift left register
- Shift right register
- Relay replacement
- Hammer Device Information
- Automotive Cluster
- A/D and D/A conversion
- Automotive Body Electronics
- Motor Drives