banner_page

SN74HC373N

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC373N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 828
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74HC373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 8
Number of Ports 2
Output Current 7.8mA
Number of Bits 8
Propagation Delay 285 ns
Quiescent Current 8μA
Turn On Delay Time 15 ns
Family HC/UH
Logic Function D-Type, Latch
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC373N Overview


20-DIP (0.300, 7.62mm) contains it. As a result, it has a packaging of Tube. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Through Hole method. A 2V~6V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. 74HC is the series number of this FPGA. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The family 74HC373 includes it. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. It is a member of the HC/UH family of electronic devices. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Through Hole. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. Vsup reaches 6V as the maximum supply voltage. A total of 2/6V power supplies are required for it to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. Input Lines consist of electronic circuits, and there are 3. The output current of 7.8mA makes it feature maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 8μA of quiescent current without being affected by outside factors. 8 circuits enable it to achieve high performance.

SN74HC373N Features


20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies

SN74HC373N Applications


There are a lot of Texas Instruments SN74HC373N Latches applications.

  • Counter control
  • Network Switches
  • Instrumentation
  • Audio and video switching
  • Shift left with parallel loading
  • PCs and Notebooks
  • Automotive Cluster
  • Up-Down Johnson
  • Accumulator Registers
  • Automotive HEV/EV Powertrain

Write a review

Note: HTML is not translated!
    Bad           Good