SN74HC373NS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Delay Time - Propagation | 15ns |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC373NS Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. The package is in the form of Tube. Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 8 bits. This device has 20 terminations. It is a member of the 74HC373 family. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. There is a device in this electronic family called HC/UH. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 6V. 2/6V power supplies are needed to operate it. It is recommended that the supply voltage (Vsup) be greater than 2V. Based on its reliable performance, this device is well suited to TR. Optimal efficiency requires 5V as the supply voltage.
SN74HC373NS Features
20-SOIC (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
SN74HC373NS Applications
There are a lot of Texas Instruments SN74HC373NS Latches applications.
- Clocks
- Four-bit storage with output enable
- Display driver
- Parallel data storage
- Pseudo-random code generators
- Counter control
- Phase comparator
- Counter timers
- Serial Output Register
- Shift right with parallel loading
