SN74HC373NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 35mA |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC373NSR Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. Packaged in the way of Cut Tape (CT). It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74HC series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. As far as this device is concerned, it has no terminations. This type belongs to the 74HC373 family. With the supply voltage set at 5V, it is able to operate. The device is equipped with 20 pins. HC/UH is the family name of this electronic device. There are 20 pins on it. Mounting this electronic component follows the Surface Mount method. This device is equipped with 2 ports. This part is included in FF/Latches. Vsup reaches 6V as the maximum supply voltage. A total of 2/6V power supplies are needed to run it. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. In the circuit, there are 3 input lines that are constituted by an electronic circuit. Its reliable performance makes it an excellent choice for TR. Its output current of 35mA ensures maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consumes 8μA of quiescent current without being affected by external factors.
SN74HC373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
SN74HC373NSR Applications
There are a lot of Texas Instruments SN74HC373NSR Latches applications.
- Buffer register
- Parallel data storage
- Network Switches
- Synchronous frequency dividers
- Avionics
- Buffer Storage
- Shift right with parallel loading
- Automotive Body Electronics
- Automotive Cluster
- Shift left with parallel loading
