SN74HC373NSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC373NSRE4 Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. Packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 2V~6V. The temperature at which the machine is operating is -40°C~85°C. The 74HC series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. This device has 20 terminations. The family it belongs to is 74HC373. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. In terms of electronic devices, this one is in the HC/UH family. With the design of the board, there are only 20 pins. A Surface Mount mounting method has been used for this electronic part. In this device, there are 2 ports. Subcategory FF/Latches contains this part. During this period, the maximum supply voltage (Vsup) reaches 6V. There are 2/6V power supplies attached to it. It is recommended that the supply voltage (Vsup) be greater than 2V. Electronic circuits comprise 8 input lines. Considering the reliability of this device, it would be a good candidate for TR. Its output current of 7.8mA ensures maximum design flexibility.
SN74HC373NSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
SN74HC373NSRE4 Applications
There are a lot of Texas Instruments SN74HC373NSRE4 Latches applications.
- Programmable binary
- Parallel data storage
- Bus system register with enable parallel lines at bus side
- Digital bus buffer
- Parallel Input
- Parallel data synchronization
- Meter applications
- Lamp and Display (LED)
- Counting
- Storage
