banner_page

SN74HC373PWE4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC373PWE4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 165
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 7.8mA
Number of Bits 8
Propagation Delay 34 ns
Turn On Delay Time 15 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current -7.8mA
Low Level Output Current 7.8mA
Control Type ENABLE LOW
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Rail/Tube
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C

SN74HC373PWE4 Overview


Package TSSOP includes it. The package is in the form of Rail/Tube. With this electronic part, there are 8 bits. A device with this design has 20 terminations. The supply voltage of the device is 5V. The 20 pind are equipped with it. There is a device in this electronic family called HC/UH. The device has 20 pins. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part is included in FF/Latches. The supply voltage should be maintained at 5V for high efficiency. The superior flexibility of the system is achieved through its use of 8 circuits. There is 7.8mA output current at the low level. It has been set to -7.8mA for the high level output current. Ideally, the operating temperature should be lower than 85°C. A temperature greater than -40°C should be used for operation. It supports a maximum supply voltage of 6V. There is a minimum supply voltage of 2V for it. A BUS DRIVER logic IC is used. As the output current is 7.8mA, the design flexibility is maximum.

SN74HC373PWE4 Features


TSSOP package
8 Bits
20 pin count
20 pins

SN74HC373PWE4 Applications


There are a lot of Texas Instruments SN74HC373PWE4 Latches applications.

  • Frequency dividing
  • Counter timers
  • A/D converters
  • Digital bus buffer
  • Audio and video switching
  • Timers
  • Serial Input
  • Hammer
  • Multi-line decoders
  • General-Purpose Register

Write a review

Note: HTML is not translated!
    Bad           Good