banner_page

SN74HC373PWG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC373PWG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 978
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 7.8mA
Number of Bits 8
Propagation Delay 34 ns
Turn On Delay Time 15 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.006 A
High Level Output Current -7.8mA
Low Level Output Current 7.8mA
Independent Circuits 1
Height 1.15mm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HC373PWG4 Overview


In the TSSOP package, it is embedded. Rail/Tube is the packaging method. There are 8 bits in this electronic part. In this device, there are 20 terminations. It operates with a supply voltage of 5V. 20 pins are provided. HC/UH is the family of this electronic device. It is designed with 20 pins. Mounting this electronic component follows the Surface Mount method. As far as ports are concerned, this device has 2 ports. This part is included in FF/Latches. Optimal efficiency requires 5V as the supply voltage. The superior flexibility of this circuit can be attributed to the use of 8 circuits. It has been set to 7.8mA for the low level output current. There is -7.8mA high level output current set. A temperature below 85°C should be used for operation. Temperatures above -40°C should be used. There is a maximum supply voltage of 6V supported by this device. It operates with the minimal supply voltage of 2V. It uses the logic IC BUS DRIVER. Its 7.8mA output current allows for maximum design flexibility.

SN74HC373PWG4 Features


TSSOP package
8 Bits
20 pin count
20 pins

SN74HC373PWG4 Applications


There are a lot of Texas Instruments SN74HC373PWG4 Latches applications.

  • Network Switches
  • Display
  • Parallel Input
  • Automotive Body Electronics
  • Flip-flops
  • Multistage ripple counting
  • Frequency dividing
  • Shift Registers
  • Automatic test equipment
  • Audio and video switching

Write a review

Note: HTML is not translated!
    Bad           Good