Parameters |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
34 ns |
Turn On Delay Time |
15 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
SN74HC373PWRE4 Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). Packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 2V~6V. It is -40°C~85°C at the operating temperature. There are a number of FPGAs in this series, including this one. The electronic part in this image has 8 bits. This device has 20 terminations. There is no doubt that it belongs to the family 74HC373. The device is operated when the supply voltage is set to 5V. There are 20 pins on it. It is a member of the HC/UH family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. 6V is the maximum supply voltage (Vsup). There is 2/6V power supply for it. The supply voltage (Vsup) should be greater than 2V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is suitable for TR. The output current of 7.8mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V.
SN74HC373PWRE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
SN74HC373PWRE4 Applications
There are a lot of Texas Instruments SN74HC373PWRE4 Latches applications.
- BCD counting
- Storage
- Automotive ADAS
- Hammer
- Parallel Input
- Communication systems
- Serial Output Data Queuing
- Address register
- PCs and Notebooks
- Sample and hold register