SN74HC373PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC373PWRG4 Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). A Tape & Reel (TR) package is used to package it. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 2V~6V, it operates. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74HC series. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74HC373. In order to operate it, the supply voltage must be 5V. With 20 pins, it is equipped. HC/UH is the family name of this electronic device. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. 6V is the maximum voltage (Vsup) that can be supplied. There is 2/6V power supply for it. The supply voltage (Vsup) should be greater than 2V. It consists of 8 input lines from which an electronic circuit can be built. As a result of its reliable performance, it is well suited for TR. With 7.8mA, maximum design flexibility is ensured. Optimal efficiency requires 5V as the supply voltage.
SN74HC373PWRG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
SN74HC373PWRG4 Applications
There are a lot of Texas Instruments SN74HC373PWRG4 Latches applications.
- Decade counting
- OC-48 communication systems
- Hammer Device Information
- Storage
- Automotive Cluster
- Decade counting 7-segment decimal display
- Pattern generators
- Serial Input
- Counter
- Relay replacement
