banner_page

SN74HC373PWTE4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC373PWTE4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 111
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Tape & Reel (TR)
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 7.8mA
Number of Bits 8
Propagation Delay 34 ns
Turn On Delay Time 15 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.006 A
High Level Output Current 7.8mA
Low Level Output Current 7.8mA
Independent Circuits 1
Length 6.5mm
Width 4.4mm
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HC373PWTE4 Overview


The package in which it is embedded is named TSSOP. Tape & Reel (TR) is the packaging method. It is designed with 8 bits. A device with this design has 20 terminations. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. This electronic device belongs to the family of HC/UH. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. Its reliable performance makes it an excellent choice for TR. The superior flexibility of this circuit can be attributed to the use of 8 circuits. 7.8mA is set as the low level output current. 7.8mA is the high level output current. The operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. The supply voltage is limited to 6V. In order for the machine to operate, the supply voltage must be 2V. There is a logic IC that it uses that is a BUS DRIVER. As the output current is 7.8mA, the design flexibility is maximum.

SN74HC373PWTE4 Features


TSSOP package
8 Bits
20 pin count
20 pins

SN74HC373PWTE4 Applications


There are a lot of Texas Instruments SN74HC373PWTE4 Latches applications.

  • Counters
  • Frequency
  • Double bus register system
  • Multi-line decoders
  • PCs and Notebooks
  • Motor Drives
  • Multistage ripple counting
  • Hammer
  • Programmable binary
  • Shift register

Write a review

Note: HTML is not translated!
    Bad           Good