SN74HC374PWT
| Parameters | |
|---|---|
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 230 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 31ns @ 6V, 50pF |
SN74HC374PWT Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74HC series. Its output frequency should not exceed 70MHz Hz. In total, there are 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. The 74HC374family includes it. The power source is powered by 5V. Input capacitance of this device is 3pF farads. Electronic devices of this type belong to the HC/UHfamily. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 8bits in this flip flop. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 8 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TR. The D latch operates on 2/6V volts. The D flip flop has no ports embedded. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 7.8mA . The number of input lines is 3.
SN74HC374PWT Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
SN74HC374PWT Applications
There are a lot of Texas Instruments SN74HC374PWT Flip Flops applications.
- Test & Measurement
- High Performance Logic for test systems
- Asynchronous counter
- Power down protection
- Registers
- Shift registers
- Frequency Divider circuits
- Patented noise
- Modulo – n – counter
- Set-reset capability
