SN74HC377ANSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Clock Frequency | 71MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 24ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| RoHS Status | ROHS3 Compliant |
SN74HC377ANSR Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. It is configured with Non-Invertedas an output. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74HC series. There should be no greater frequency than 71MHzon its output. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. JK flip flop belongs to 74HC377 family. A 3pFfarad input capacitance is provided by this T flip flop.
SN74HC377ANSR Features
Tape & Reel (TR) package
74HC series
SN74HC377ANSR Applications
There are a lot of Texas Instruments SN74HC377ANSR Flip Flops applications.
- Instrumentation
- Asynchronous counter
- Modulo – n – counter
- Count Modes
- Clock pulse
- Power down protection
- EMI reduction circuitry
- QML qualified product
- Memory
- Automotive
