SN74HC377DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 64MHz |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC377DWG4 Overview
In the form of SOIC, it has been packaged. In total, it contains 1 elements. There have been 20 terminations. A voltage of 5V is used as the power supply for this D latch. Electronic devices of this type belong to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. Due to its reliability, this T flip flop is well suited for TUBE. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It is also characterized by WITH HOLD MODE. -5.2mA is set as the high level output current. There is no low level output current set at 5.2mA. Temperatures below 85°Care ideal for operating. It is recommended that the operating temperature is higher than -40°C. The minimum voltage required for operation is 2V. It is capable of supporting a maximum supply voltage of 6V. This frequency can be achieved at 64MHz. D FLIP-FLOPis used as the logic IC in this D flip flop. As a result, it is equipped with 1 functions . It is equipped with 20 pins. The output current of 5.2mA makes it feature maximum design flexibility.
SN74HC377DWG4 Features
20 pins
1 Functions
20 pin count
SN74HC377DWG4 Applications
There are a lot of Texas Instruments SN74HC377DWG4 Flip Flops applications.
- Registers
- Individual Asynchronous Resets
- EMI reduction circuitry
- Instrumentation
- Bus hold
- Count Modes
- Memory
- Control circuits
- Shift Registers
- Cold spare funcion
