SN74HC377NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 64MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| RoHS Status | ROHS3 Compliant |
SN74HC377NG4 Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop is configured with an output of Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. It belongs to the 74HCseries of FPGAs. There should be no greater frequency than 64MHzon its output. A total of 1elements are contained within it. As a result, it consumes 8μA quiescent current and is not affected by external forces. D latch belongs to the 74HC377 family. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
SN74HC377NG4 Features
Tube package
74HC series
SN74HC377NG4 Applications
There are a lot of Texas Instruments SN74HC377NG4 Flip Flops applications.
- Control circuits
- Parallel data storage
- Computers
- Computing
- ESD protection
- Pattern generators
- Power down protection
- Shift registers
- Load Control
- Memory
