SN74HC393D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 360 ns |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 36MHz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC393D Overview
This is a device supplied in the 14-SOIC (0.154, 3.90mm Width) package. It is configured with 14terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. The 2elements are connected by wires. In all, there are 14 pins on each component. Tubeis used to package it. In the circuit, 14pins are used to connect other components. It is mounted in the manner of [0]. In this case, it belongs to the family of [0]. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is assumed that the logic type is [0]. It is recommended that the operating temperature be set to -40°C~85°C. The mounting type is Surface Mount. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. The array contains elements containing 4bits each. Pbfree code may result in yes. Among its base part number [0], you will find additional parts that are related. The device operates on a supply voltage of [0]. The minimum supply voltage (Vsup) is 2V. Frequency 60MHzdetermines its operation. Typically, the supply voltage (Vsup) is limited to 6V.
SN74HC393D Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC393D Applications
There are a lot of Texas Instruments SN74HC393D Counters & Dividers applications.
- Binary counter/decoder
- LINEARIZATION
- DIVISION
- SQUARE ROOT
- Divide-by"N" counters/frequency synthesizers
- Frequency division
- VHF, UHF, FM, AM, etc.
- TRUE RMS-TO-DC CONVERSION
- ALGEBRAIC COMPUTATION
- Divide-by-N counting
