SN74HC393DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 60MHz |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 360 ns |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 36MHz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC393DBR Overview
14-SSOP (0.209, 5.30mm Width)is a package in which this device is packaged. 14 terminations are used for its configuration. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. The 2elements are connected by wires. The number of all component pins is 14. It is packaged in the way of Cut Tape (CT). There are 14 pins going on to connect other parts in the circuit. It is mounted using the way of [0]. In this case, it appears as a member of the family [0]. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. It is adopted that the logic type is [0]. -40°C~85°Cshould be set as the operating temperature. It adopts a mounting type of Surface Mount. Providing a supply voltage of 2V~6Vallows it to operate more reliably. There are 4 bits stored in each element of the array. In terms of Pbfree code, the result may be yes. More related parts are available under its base part number 74HC393. It is packed with [0]. For the device to operate, a voltage supply of 5Vis required. Supply voltages can be as low as 2V volts (Vsup). It operates at a frequency of 60MHz Hz. The maximum supply voltage (Vsup) is up to 6V.
SN74HC393DBR Features
Embedded in the 14-SSOP (0.209, 5.30mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC393DBR Applications
There are a lot of Texas Instruments SN74HC393DBR Counters & Dividers applications.
- Time delay circuits
- SQUARE ROOT
- Frequency dividing circuits
- Programmable binary and decade
- Fixed and programmable counters greater than 10
- Divide-by"N" counters/frequency synthesizers
- Counter control/timers
- DIVISION
- Programmable decade counters
- Clocks
