SN74HC393N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 360 ns |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 36MHz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC393N Overview
14-DIP (0.300, 7.62mm)is a package in which this device is packaged. It is configured using 14terminations. The supply voltage of 5V enables it operate in a fully flexible way. 2 elements are interconnected in wires. The total number of component pins is 14. As a result, it is packaged as Tube. In the circuit, there are 14pins that connect other parts. Through Holeis the way in which it is mounted. The HC/UHfamily includes it. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. It is decided to use the logic type [0]. -40°C~85°Cshould be the operating temperature. This device is mounted in a Through Holemanner. When the supply voltage is set to [0], it is able to operate with greater reliability. There are 4bits stored in each element of the array. You can find more related parts under its base part number of 74HC393. It takes supply voltage of 5V to operate. In the case of the supply voltage (Vsup), it can be as low as 2V. In this case, the frequency is 60MHz Hz. It is possible to provide a voltage up to 6V (Vsup).
SN74HC393N Features
Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC393N Applications
There are a lot of Texas Instruments SN74HC393N Counters & Dividers applications.
- Decade counter/decimal decode display (CD4017B）
- Programmable binary and decade
- ANALOG SIGNAL PROCESSING
- Divide-by"N" counters/frequency synthesizers
- Frequency dividers
- Programmable decade counters
- Clocks
- Time delay circuits
- Time Out Timer for Consumer-Application Industrial Controls
- DIVISION
