SN74HC393PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 60MHz |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 360 ns |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC393PWE4 Overview
The device is packaged in the TSSOPtype. In order to configure it, it uses 14terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. In this diagram, there are 2elements that are interconnected by wires. 14is the number of pins on all components. Circuit components are connected by 14pins. It is mounted in the manner of [0]. The HC/UHfamily is derived from it. The are 4 bits information in the device. In this device, the temperature grade is INDUSTRIAL. In order to pack the product, TUBEis employed. The device operates on a supply voltage of [0]. Electrical characteristics remain stable for extended periods of time at [0]. Temperature ranges are specified, with -40°Cset as a lower limit. The frequency of the system is 60MHz. There is a maximum voltage available for the device of 6V. There is a minimum voltage available for the device of 2V.
SN74HC393PWE4 Features
Embedded in the TSSOP package
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC393PWE4 Applications
There are a lot of Texas Instruments SN74HC393PWE4 Counters & Dividers applications.
- SQUARE ROOT
- Dual Up Counters
- Time delay circuits
- Time-delay circuits
- Binary counter/decoder
- Timing applications
- Frequency dividers
- Communications Digital Frequency Synthesizers;
- MULTIPLICATION
- Analog multiplexing and demultiplexing
